Mobile phone signal booster ireland

16 April 2021
MOBILE SIGNAL BOOSTER IRELAND

A mobile signal booster (also known as amplifier or repeater) is made up of three main elements – exterior antenna, amplifier and interior antenna. 

They form a wireless system to boost cellular reception. 

This article is geared towards how to help improve cell phone signal strength, and show types of mobile amplifiers available so you can make an informed decision.

 A mobile signal booster is generally a repeater system that involves the amplifier adding gain or power to the reception in various directions. 

Even for a cheap cell phone signal booster, maximum gain differs by application.

The work of an outside antenna is to both receive and transmit signal to a cellular tower with enhanced power and sensitivity. Usually the dB gain. 

The system’s element conduit is the coaxial cable. It is also a factor in transmission loss.

The main aim of the cellular phone signal booster is taking the existing cell phone signal around your car, office, workstation or home and amplifying it. 

After amplification, the signal is rebrocasted to the area with no reception or weak signal.  

Apart from consisting of an amplifier to boost the reception, external antenna and internal antenna, there are mobile boosters with indoor antenna and amplifier as single unit making them superb indoor mobile signal boosters. 

In most cases the three components are detached. Other optional components include the attenuator (reduces unwanted frequency signals), Lightning Surge Protector, Splitter and tap.

Mobile signal boosters are devices that provide strength to a weak signal by amplifying the carrier frequency signal. 

Due to the presence of numerous dead spots where there is no signal or very poor signal. 

Due to the presence of numerous dead spots where there is no signal or very poor signal, mobile signal boosters help wireless network providers to improve coverage in such areas.

There is also a very common booster popularly known as the WI-FI signal booster extends WiFi network coverage space by boosting or amplifying existing signals. 

It enables all wireless devices within that expanded coverage space to connect to the internet or similar wireless network. 

It is a unique solution that works by pulling in an existing weak Wi-Fi from transmitter.

Mobile Signal boosters or repeaters involve placing an antenna on the roof of a house that captures any available mobile signal in the surrounding area and boosts it into a home or limited located area without a special license is deemed to be illegal , but where there is a special licence for it used, it is legal, in as much as such devices meets up with the European Standards and technical conditions under the TELEGRAPHY ACT I926 to 2009.

At home, there are several ways to improve your mobile coverage in the home using a broadband connection.  

These work by connecting a router and sending traffic over the broadband network to increase mobile signal.

THERE ARE 7 WAYS TO BOOST MOBILE SIGNAL STRENGTH FOR FREE.

1.    Check your phone for damage

2.    Make sure the software on your phone is up to date.

3.     Use Wifi calling when you are on a reliable internet connection.

4.    Disable LTE if your phone is showing a single Bar

5.    Upgrade to a newer phone

6.    Ask your carrier about a MicroCell

7.    Change to a different Carrier.

Furthermore, we will like to highlight in this article the top 10 best mobile signal boosters that should handle almost any situation꞉

1.    Wilson Pro 70 plus

2.    Cel-fi GO X

3.    SureCall Fusion2Go Max

4.    weBoost Home MultiRoom

5.    SureCall Flare 3.0

6.    weBoost Drive Reach

7.    SureCall Fusion5X 2.0

8.    SureCall Flare

9.    SureCall Fusion4Home Yagi

10. SureCall Fusion5s

This leads to issues like call drops, slow internet speed, poor voice quality, stuck text and email messages and more.

As  smartphones have become an integral part of lives, poor signal reception can be frustrating. It, at times, also affects our productivity. 

So , if you are also facing such issues with your cellular connection, here are 5 tips and tricks you use to boost the signal strength.

1.    Remove any type of cover, case or hand blocking the antenna of the smartphone.

Using a cover/ case on your smartphone gives added protection but at the same time, it may affect the signal reception strength. 

This is especially in case of thick and rugged cases. Make sure you hold the phone in such a way that it does not block the antenna bands of the device. 

2.    Remove obstructions between your smartphone and the cell tower

You must be wondering, how can you remove the obstruction between the cell phone and cell towers. Your cell phones receive the signal from the cell tower constantly and the signal coming from the tower already goes through several obstructions and they can get weakened by time it reaches your  smartphone.

There are few things you can do to remove the interference

a)    Move near to a window or open area.

b)   Move away from any object or wall made of metal or concrete.c)    Keep your Smartphone away from the electronic equipment and metal objects.

 3.    Conserve your cell phone battery

Smartphones  are designed to save battery when it is low and while finding signals our cell phones consume battery. 

So, when the Smartphone ‘s battery is low, chances are it may find it difficult to search to search the signal.So, in such cases, we should turn off apps, Bluetooth, Wi-Fi and other connectivity options not in use.

 4.     Check your SIM card for any damage or dust.

Sometimes we feel that the signal strength of the phone has dropped all of sudden. This can also be due to dust or any other kind of damage caused to the SIM card.

The signal strength highly depends on the SIM card we are using. Dust is something that enters into our smartphone no matter what sort of precautions we take. 

So, it’s advisable to take out your SIM card. So , getting a new SIM card from a service provider can fix the problem.

 5.    Switch back to 2G or 3G network

In some areas, we see that the signal strength of the 4G network is weak. Our mobile phones are designed to make the network mode switch automatically when the signal reception of a particular mode is weak. 

However, the devices keep on pushing the priority network mode and this may result in frequent call drops.

To fix this, we can manually select the network mode in the settings of our phone.

For Android users꞉ Go to connection settings≤ mobile networks≥ choose 2G only or 3G only option.

For iPhone users꞉ Go to settings ≥ Cellular – Cellular data options – Disable the Enable  4G toggle

Leave a Reply